Wireless USB modems / dongles

FirstView
Versio hetkellä 5. heinäkuuta 2016 kello 11.17 – tehnyt Nikolai (keskustelu | muokkaukset) (Ak: Uusi sivu: '''NOTE! HiLink USB modems are configured with a computer using an internet browser.''')

Loikkaa: valikkoon, hakuun
Muut kielet:
English • ‎suomi

There are two types of USB modems (i.e. dongles) available. It is important that you recognize which type your USB modem is.

For now, only the PiCube directly supports 3G/4G USB modems.

NOTE! PiCube doesn’t support the new HiLink USB modems until Filesystem version 2015032578 (can be seen during startup).

Traditional USB modems

Before the year 2015 the USB modems available were mainly the ’traditional’ type. This means that the device / computer detects them as a USB-modem.

When using traditional USB modems, the PiCube has to be configured to use the USB modem with the operator’s settings. Check Configuration instructions.

New HiLink USB modems

Already during 2014 Huawei brought new types of USB modems (HiLink) to the market. They are small routers on their own and the device / computer detects them as a network interface card. From the year 2015 practically all Huawei’s USB modems available in the market were HiLink models.

NOTE! When using a HiLink USB Modem, the PiCube is NOT configured to 3G/4G mode but is left with factory settings (=ethernet and DHCP).

Instead, the USB modem itself has to be configured to use the operator’s settings (usually the settings are already in order). The instructions can be found from the USB modem’s package or the opearator’s website. If you’re not sure if the USB modem is preconfigured, you should test it first with a computer and make sure it can be used to connect to the internet.

At the same time it is recommended to check the USB modems other connection-related settings (connect automatically, always on etc.).

NOTE! HiLink USB modems are configured with a computer using an internet browser.

Nettitikun mallin tunnistaminen

  • Ulkoisesti nettitikun tyypin selvittäminen ei valitettavasti aina ole mahdollista, jopa täsmälleen samalla mallinumerolla olevat nettitikut voivat olla eri tyyppejä ohjelmistonsa suhteen. Mikäli jossain näkyy teksti HiLink, voit olla varma, että kyseessä on uutta tyyppiä oleva nettitikku. Kannattaa katsoa tarkkaan itse mokkula (ml. luukun alta, SIM-korttipaikan kohdalta jne), laatikko ja manuaalit.
  • Jos muuten ei varmuutta asiaan saa, niin kytke nettitikku tietokoneeseen. Kun tietokone on asentanut ajurit ja jos sen jälkeen ruudulle aukeaa nettiselain jossa nettitikun ja operaattorin tietoja, on kyseessä HiLink versio. Tällöin PiCubea ei tarvitse konfiguroida erikseen.
  • Mikäli tietokoneelle avautuukin erillinen yhteysohjelmisto, on kyseessä taas perinteinen nettitikku.