Ero sivun ”Translations:Ohjelmiston asentaminen mediasoittimeen/1/en” versioiden välillä

FirstView
Loikkaa: valikkoon, hakuun
Rivi 1: Rivi 1:
 
== HDCube ==
 
== HDCube ==
* Download latest software from http://swimages.firstview.fi/hd2018032256.zip (version '''2018032256''' released 22.03.2018 md5sum 882e5699e70627b883b65e4dd59dd07a)
+
* Download latest software from http://swimages.firstview.fi/hd2018112772.zip (version '''2018112772''' released 27.11.2018 md5sum 48c98723d9ecb3555c72165511f81b58)
 
* '''Make sure USB-stick follows these rules'''
 
* '''Make sure USB-stick follows these rules'''
 
** There's enough space
 
** There's enough space

Versio 9. tammikuuta 2019 kello 10.09

Tietoja viestistä (auta dokumentoinnissa)
Tätä viestiä ei ole dokumentoitu. Jos tiedät missä tai miten tätä viestiä käytetään, voit auttaa muita kääntäjiä lisäämällä kommentteja tähän viestiin.
Viestin määritelmä (Ohjelmiston asentaminen mediasoittimeen)
== HDCube ==
* Lataa viimeisin ohjelmisto https://swimages.firstview.fi/hd20230913110.zip
* '''VARMISTA seuraavat asiat:'''
** USB-tikulla on tarpeeksi tilaa
** USB-tikun tiedostojärjestelmän pitää olla FAT32 (EI NTFS, HFS tms)
** Jos asennus ei onnistu, voit SD Formatter työkalulla varmistaa, että USB-tikku on varmasti oikeassa formaatissa https://www.sdcard.org/downloads/formatter_4/
*** Options napin takaa valitse 'Quick Format' ja 'Format size adjustment' = on
*** Paina OK ja Format
* Pura .zip paketti USB-tikun juureen, siten, että USB-tikun juureen tulee mm. hakemisto EFI
* Kytke USB-tikku, USB-näppäimistö ja näyttö soittimeen (jos soitin on tyhjä, pelkkä tikku riittää, käynnistyy siltä silloin automaattisesti)
* Kytke soittimeen virrat päälle ja samalla painele 0,5 sekunnin syklillä F10 nappia
* Seuraavaksi ruutuun tulee Käynnistysmenu. Valitse siitä sellainen rivi, jossa lukee UEFI JA USB (molemmat!) ja paina enter
* Noin minuutin kuluttua näet ruudulta, että ohjelmointi valmis. Ota USB-tikku ja näppäimistö irti ja käynnistä soitin uudelleen
* Valmis
Käännös== HDCube ==
* Download latest software from http://swimages.firstview.fi/hd2018112772.zip (version '''2018112772''' released 27.11.2018 md5sum 48c98723d9ecb3555c72165511f81b58)
* '''Make sure USB-stick follows these rules'''
** There's enough space
** USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
** If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
*** Under options choose 'Quick Format' and 'Format size adjustment' = on
*** Press ok and Format
* Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
* Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
* Power on the player and keep pressing F10 every 0.5 seconds
* Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
* After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
* Ready

HDCube

  • Download latest software from http://swimages.firstview.fi/hd2018112772.zip (version 2018112772 released 27.11.2018 md5sum 48c98723d9ecb3555c72165511f81b58)
  • Make sure USB-stick follows these rules
    • There's enough space
    • USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
    • If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
      • Under options choose 'Quick Format' and 'Format size adjustment' = on
      • Press ok and Format
  • Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
  • Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
  • Power on the player and keep pressing F10 every 0.5 seconds
  • Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
  • After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
  • Ready