Ero sivun ”Translations:Ohjelmiston asentaminen mediasoittimeen/1/en” versioiden välillä
FirstView
(11 välissä olevaa versiota samalta käyttäjältä ei näytetä) | |||
Rivi 1: | Rivi 1: | ||
== HDCube == | == HDCube == | ||
− | * Download latest software from | + | * Download latest software from https://swimages.firstview.fi/hd20230913110.zip |
* '''Make sure USB-stick follows these rules''' | * '''Make sure USB-stick follows these rules''' | ||
** There's enough space | ** There's enough space |
Nykyinen versio 29. syyskuuta 2023 kello 08.17
HDCube
- Download latest software from https://swimages.firstview.fi/hd20230913110.zip
- Make sure USB-stick follows these rules
- There's enough space
- USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
- If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
- Under options choose 'Quick Format' and 'Format size adjustment' = on
- Press ok and Format
- Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
- Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
- Power on the player and keep pressing F10 every 0.5 seconds
- Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
- After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
- Ready