Translations:Ohjelmiston asentaminen mediasoittimeen/2/en

HDCuben BIOS-update and settings

• IMPORTANT! Make sure that BIOS version is ATLEAST 0050 for gray model (DN2820FYKH) or 0042 for black model (DC3217IYE) or 0048 for newest 5th generation NUC (NUC5CPYH)
  • IMPORTANT for NUC5CPYH MODELS! You have to configure os as Linux in BIOS settings: From mainpage -> Advanced (under Boot Order) -> Boot Configuration -> OS Selection -> LINUX!
  • After powering on, keep pressing F2 every 0.5 seconds
  • BIOS settings will open and look for Bios Version. If 3rd field has smaller number than required, you HAVE to update BIOS!
  • It's also good to check that player has been configured to power on automatically after power failure
  • Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
  • Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
• BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
• You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
• Choose your USB dongle from the menu and then choose the correct .bio file