Installing software to mediaplayer
FirstView
Versio hetkellä 19. helmikuuta 2016 kello 11.23 – tehnyt FuzzyBot (keskustelu | muokkaukset) (Päivittäminen vastaamaan uutta versiota lähdesivusta)
HDCube
- Lataa viimeisin ohjelmisto http://swimages.firstview.fi/hd2016021638.zip (versio 2016021638 julkaistu 16.02.2016 md5sum aa69fb5c461f0a107604dc9bdf68ce2a)
- VARMISTA seuraavat asiat:
- USB-tikulla on tarpeeksi tilaa
- USB-tikun tiedostojärjestelmän pitää olla FAT32 (EI NTFS, HFS tms)
- Jos asennus ei onnistu, voit SD Formatter työkalulla varmistaa, että USB-tikku on varmasti oikeassa formaatissa https://www.sdcard.org/downloads/formatter_4/
- Options napin takaa valitse 'Quick Format' ja 'Format size adjustment' = on
- Paina OK ja Format
- Pura .zip paketti USB-tikun juureen, siten, että USB-tikun juureen tulee mm. hakemisto EFI
- Kytke USB-tikku, USB-näppäimistö ja näyttö soittimeen (jos soitin on tyhjä, pelkkä tikku riittää, käynnistyy siltä silloin automaattisesti)
- Kytke soittimeen virrat päälle ja samalla painele 0,5 sekunnin syklillä F10 nappia
- Seuraavaksi ruutuun tulee Käynnistysmenu. Valitse siitä sellainen rivi, jossa lukee UEFI JA USB (molemmat!) ja paina enter
- Noin minuutin kuluttua näet ruudulta, että ohjelmointi valmis. Ota USB-tikku ja näppäimistö irti ja käynnistä soitin uudelleen
- Valmis
HDCuben BIOS-update and settings
- IMPORTANT! Make sure that BIOS version is ATLEAST 0050 for gray model (DN2820FYKH) or 0042 for black model (DC3217IYE) or 0048 for newest 5th generation NUC (NUC5CPYH)
- IMPORTANT for NUC5CPYH MODELS! You have to configure os as Linux in BIOS settings: From mainpage -> Advanced (under Boot Order) -> Boot Configuration -> OS Selection -> LINUX!
- After powering on, keep pressing F2 every 0.5 seconds
- BIOS settings will open and look for Bios Version. If 3rd field has smaller number than required, you HAVE to update BIOS!
- It's also good to check that player has been configured to power on automatically after power failure
- Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
- Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
- BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
- You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
- Choose your USB dongle from the menu and then choose the correct .bio file
PiCube
- Download latest software from http://swimages.firstview.fi/pi2016020394.img (version 2016020394 released 02.03.2016 md5sum a4a8f0c07e352c7686780b69573a1a23)
- Download Win32 Disk Imager (windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager
- NOTE you HAVE to use above program to write the image to SD-card, you can't just copy it!
- Insert SD-card to card reader in your PC
- Use Win32 Disk Imager to write the image to SD-card
- Insert SD-card to Raspberry Pi and it's ready
- Instructions for Mac OS X http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X
- Instructions for Linux http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29
Katso tuetut minitietokoneet