Ero sivun ”Ohjelmiston asentaminen mediasoittimeen/en” versioiden välillä

FirstView
Loikkaa: valikkoon, hakuun
Rivi 15: Rivi 15:
 
* Ready
 
* Ready
  
−
=== HDCuben BIOS-päivitys ja asetukset ===
+
=== HDCuben BIOS-update and settings ===
−
* '''TÄRKEÄÄ! '''Varmista, että intel NUCin BIOS on VÄHINTÄÄN versio '''0050''' harmaalle (DN2820FYKH) tai '''0042''' mustalle (DC3217IYE) tai '''0048''' uusimmalle 5. generaation NUC:lle (NUC5CPYH).
+
* '''IMPORTANT! '''Make sure that BIOS version is ATLEAST '''0050''' for gray model (DN2820FYKH) or '''0042''' for black model (DC3217IYE) or '''0048''' for newest 5th generation NUC (NUC5CPYH)
−
** '''HUOM! NUC5CPYH mallin laitteessa TEHTÄVÄ seuraava BIOS-asetus: Pääsivulta -> Advanced (Boot Order kohdalta) -> Boot Configuration -> OS Selection -> LINUX!'''
+
** '''IMPORTANT for NUC5CPYH MODELS! You have to configure os as Linux in BIOS settings: From mainpage -> Advanced (under Boot Order) -> Boot Configuration -> OS Selection -> LINUX!'''
−
** Virrankytkemisen yhteydessä painele '''F2''' nappia 0,5 sekunnin sykleissä.
+
** After powering on, keep pressing '''F2''' every 0.5 seconds
−
** Aukeaa BIOS-menu, katso kohtaa Bios Version. Jos 3. kentässä näkyy pienempi luku kuin vaadittu, on BIOS päivitettävä!
+
** BIOS settings will open and look for Bios Version. If 3rd field has smaller number than required, you HAVE to update BIOS!
−
** '''Samalla on syytä tarkistaa, että Intel NUC on laitettu käynnistymään automaattisesti virtakatkon jälkeen. '''
+
** '''It's also good to check that player has been configured to power on automatically after power failure'''
−
** Onnistuu parhaiten hiirellä. Mene Advanced valikkoon ja sieltä Power välilehti.
+
** Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
−
** After Power Failure kohdassa pitää lukea: Power On. Jos ei lue, niin valitse se jonka jälkeen paina F10 ja Y niin uudet asetukset tallentuvat.
+
** Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
−
* BIOS-tiedoston voi ladata osoitteesta https://downloadcenter.intel.com/search?keyword=DN2820FYKH (kirjoita laatikkoon oikea malli, löytyy soittimen pohjasta Model:)
+
* BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
−
* Voit käyttää samaa USB-tikkua BIOSin päivitykseen, tallenna .bio tiedosto tikulle ja kun kytket virrat soittimeen, painele '''F7''' näppäin 0,5 sekunnin sykleissä.  
+
* You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing '''F7''' every 0.5 seconds.
−
* Sen jälkeen valitset USB-tikun menusta ja BIOS-tiedoston näppämistöllä
+
* Choose your USB dongle from the menu and then choose the correct .bio file
  
 
== PiCube ==
 
== PiCube ==

Versio 16. helmikuuta 2016 kello 15.19

Muut kielet:
English • ‎suomi

HDCube

  • Download latest software from http://swimages.firstview.fi/hd2016021638.zip (version 2016021638 released 16.02.2016 md5sum 188bbf657a2d00db2a699197dbdc698a)
  • Make sure USB-stick follows these rules
    • There's enough space
    • USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
    • If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
      • Under options choose 'Quick Format' and 'Format size adjustment' = on
      • Press ok and Format
  • Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
  • Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
  • Power on the player and keep pressing F10 every 0.5 seconds
  • Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
  • After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
  • Ready

HDCuben BIOS-update and settings

  • IMPORTANT! Make sure that BIOS version is ATLEAST 0050 for gray model (DN2820FYKH) or 0042 for black model (DC3217IYE) or 0048 for newest 5th generation NUC (NUC5CPYH)
    • IMPORTANT for NUC5CPYH MODELS! You have to configure os as Linux in BIOS settings: From mainpage -> Advanced (under Boot Order) -> Boot Configuration -> OS Selection -> LINUX!
    • After powering on, keep pressing F2 every 0.5 seconds
    • BIOS settings will open and look for Bios Version. If 3rd field has smaller number than required, you HAVE to update BIOS!
    • It's also good to check that player has been configured to power on automatically after power failure
    • Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
    • Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
  • BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
  • You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
  • Choose your USB dongle from the menu and then choose the correct .bio file

PiCube

Katso tuetut minitietokoneet

Haettu osoitteesta http://wiki.firstview.fi/w/index.php?title=Ohjelmiston_asentaminen_mediasoittimeen/en&oldid=1006