Ero sivun ”Ohjelmiston asentaminen mediasoittimeen/en” versioiden välillä
FirstView
(Päivittäminen vastaamaan uutta versiota lähdesivusta) |
|||
Rivi 29: | Rivi 29: | ||
== PiCube == | == PiCube == | ||
− | * | + | * Lataa viimeisin ohjelmisto http://swimages.firstview.fi/pi2016092399.img (versio '''2016092399''' julkaistu 23.9.2016 md5sum dc64bf31f167f4d7a5a366c54acae73f) |
− | * | + | * Lataa win32 Disk Imager ohjelmisto (Windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager |
− | * ''' | + | * '''HUOM!''' ohjelmisto on kirjoitettava ym. ohjelmalla SD-kortille, tiedostoa EI voi suoraan vain kopioda kortille! |
− | * | + | * Laita microSD-kortti kortinlukijaan ja kiinni tietokoneeseen |
− | * | + | * Käynnistä Win32 Disk Imager ja kirjoita lataamasi PiCubeLatest.img kortille |
− | * | + | * Tämän jälkeen laita SD-kortti PiCube-soittimeen ja se on valmis |
− | * | + | * Mac OS X ohjeet (englanniksi) http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X |
− | * | + | * Linux ohjeet (englanniksi) http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29 |
Katso [[Tuetut_minitietokoneet|tuetut minitietokoneet]] | Katso [[Tuetut_minitietokoneet|tuetut minitietokoneet]] | ||
[[Category:User guides and manuals/en]] | [[Category:User guides and manuals/en]] |
Versio 26. syyskuuta 2016 kello 08.53
HDCube
- Download latest software from http://swimages.firstview.fi/hd2016072242.zip (version 2016072242 released 22.07.2016 md5sum 55ab8415cb1e52c0054be6df204d6739)
- Make sure USB-stick follows these rules
- There's enough space
- USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
- If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
- Under options choose 'Quick Format' and 'Format size adjustment' = on
- Press ok and Format
- Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
- Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
- Power on the player and keep pressing F10 every 0.5 seconds
- Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
- After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
- Ready
HDCuben BIOS-update and settings
- IMPORTANT! Make sure that BIOS version is ATLEAST 0050 for gray model (DN2820FYKH) or 0042 for black model (DC3217IYE) or 0048 for newest 5th generation NUC (NUC5CPYH)
- IMPORTANT for NUC5CPYH MODELS! You have to configure os as Linux in BIOS settings: From mainpage -> Advanced (under Boot Order) -> Boot Configuration -> OS Selection -> LINUX!
- After powering on, keep pressing F2 every 0.5 seconds
- BIOS settings will open and look for Bios Version. If 3rd field has smaller number than required, you HAVE to update BIOS!
- It's also good to check that player has been configured to power on automatically after power failure
- Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
- Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
- BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
- You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
- Choose your USB dongle from the menu and then choose the correct .bio file
PiCube
- Lataa viimeisin ohjelmisto http://swimages.firstview.fi/pi2016092399.img (versio 2016092399 julkaistu 23.9.2016 md5sum dc64bf31f167f4d7a5a366c54acae73f)
- Lataa win32 Disk Imager ohjelmisto (Windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager
- HUOM! ohjelmisto on kirjoitettava ym. ohjelmalla SD-kortille, tiedostoa EI voi suoraan vain kopioda kortille!
- Laita microSD-kortti kortinlukijaan ja kiinni tietokoneeseen
- Käynnistä Win32 Disk Imager ja kirjoita lataamasi PiCubeLatest.img kortille
- Tämän jälkeen laita SD-kortti PiCube-soittimeen ja se on valmis
- Mac OS X ohjeet (englanniksi) http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X
- Linux ohjeet (englanniksi) http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29
Katso tuetut minitietokoneet