Ero sivun ”Ohjelmiston asentaminen mediasoittimeen/en” versioiden välillä

FirstView
Loikkaa: valikkoon, hakuun
(Ak: Uusi sivu: == HDCube == * Download latest software from http://swimages.firstview.fi/HDCubeLatest.zip * Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc *...)
(Ak: Uusi sivu: === HDCuben BIOS-update and settings === * '''IMPORTANT! '''Make sure that BIOS version is ATLEAST '''0050'''. ** After powering on, keep pressing '''F2''' every 0.5 seconds ** BIO...)
Rivi 9: Rivi 9:
 
* Ready
 
* Ready
  
−
=== HDCuben BIOS-päivitys ja asetukset ===
+
=== HDCuben BIOS-update and settings ===
−
* '''TÄRKEÄÄ! '''Varmista, että intel NUCin BIOS on VÄHINTÄÄN versio '''0050'''.
+
* '''IMPORTANT! '''Make sure that BIOS version is ATLEAST '''0050'''.
−
** Virrankytkemisen yhteydessä painele '''F2''' nappia 0,5 sekunnin sykleissä.
+
** After powering on, keep pressing '''F2''' every 0.5 seconds
−
** Aukeaa BIOS-menu, katso kohtaa Bios Version. Jos 3. kentässä näkyy 0050 ei BIOSia ole pakko päivittää. Jos siinä on pienempi luku, esim. 0030, on BIOS päivitettävä!
+
** BIOS settings will open and look for Bios Version. If 3rd field has 0050 in it, there's no need to update BIOS. BUT, if it's something smaller like 0030, you HAVE to update BIOS!
−
** '''Samalla on syytä tarkistaa, että Intel NUC on laitettu käynnistymään automaattisesti virtakatkon jälkeen. '''
+
** '''It's also good to check that player has been configured to power on automatically after power failure'''
−
** Onnistuu parhaiten hiirellä. Mene Advanced valikkoon ja sieltä Power välilehti.
+
** Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
−
** After Power Failure kohdassa pitää lukea: Power On. Jos ei lue, niin valitse se jonka jälkeen paina F10 ja Y niin uudet asetukset tallentuvat.
+
** Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
−
* BIOS-tiedoston voi ladata osoitteesta https://downloadcenter.intel.com/search?keyword=DN2820FYKH (kirjoita laatikkoon oikea malli, löytyy soittimen pohjasta Model:)
+
* BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
−
* Voit käyttää samaa USB-tikkua BIOSin päivitykseen, tallenna .bio tiedosto tikulle ja kun kytket virrat soittimeen, painele '''F7''' näppäin 0,5 sekunnin sykleissä.  
+
* You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing '''F7''' every 0.5 seconds.
−
* Sen jälkeen valitset USB-tikun menusta ja BIOS-tiedoston näppämistöllä
+
* Choose your USB dongle from the menu and then choose the correct .bio file
  
 
== PiCube ==
 
== PiCube ==

Versio 29. kesäkuuta 2015 kello 10.29

Muut kielet:
English • ‎suomi

HDCube

  • Download latest software from http://swimages.firstview.fi/HDCubeLatest.zip
  • Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
  • Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
  • Power on the player and keep pressing F10 every 0.5 seconds
  • Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
  • After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
  • Ready

HDCuben BIOS-update and settings

  • IMPORTANT! Make sure that BIOS version is ATLEAST 0050.
    • After powering on, keep pressing F2 every 0.5 seconds
    • BIOS settings will open and look for Bios Version. If 3rd field has 0050 in it, there's no need to update BIOS. BUT, if it's something smaller like 0030, you HAVE to update BIOS!
    • It's also good to check that player has been configured to power on automatically after power failure
    • Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
    • Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
  • BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
  • You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
  • Choose your USB dongle from the menu and then choose the correct .bio file

PiCube

Haettu osoitteesta http://wiki.firstview.fi/w/index.php?title=Ohjelmiston_asentaminen_mediasoittimeen/en&oldid=826