Ero sivun ”Ohjelmiston asentaminen mediasoittimeen/en” versioiden välillä
FirstView
(Ak: Uusi sivu: === HDCuben BIOS-update and settings === * '''IMPORTANT! '''Make sure that BIOS version is ATLEAST '''0050'''. ** After powering on, keep pressing '''F2''' every 0.5 seconds ** BIO...) |
(Ak: Uusi sivu: == PiCube == * Download latest software from http://swimages.firstview.fi/PiCubeLatest.img * Download Win32 Disk Imager (windows) http://www.raspberry-projects.com/pi/pi-operating-...) |
||
| Rivi 21: | Rivi 21: | ||
== PiCube == | == PiCube == | ||
| − | * | + | * Download latest software from http://swimages.firstview.fi/PiCubeLatest.img |
| − | * | + | * Download Win32 Disk Imager (windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager |
| − | * ''' | + | * '''NOTE''' you HAVE to use above program to write the image to SD-card, you can't just copy it! |
| − | * | + | * Insert SD-card to card reader in your PC |
| − | * | + | * Use Win32 Disk Imager to write the image to SD-card |
| − | * | + | * Insert SD-card to Raspberry Pi and it's ready |
| − | * Mac OS X | + | * Instructions for Mac OS X http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X |
| − | * Linux | + | * Instructions for Linux http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29 |
[[Category:Ohjeet ja manuaalit]] | [[Category:Ohjeet ja manuaalit]] | ||
Versio 29. kesäkuuta 2015 kello 10.34
HDCube
- Download latest software from http://swimages.firstview.fi/HDCubeLatest.zip
- Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
- Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
- Power on the player and keep pressing F10 every 0.5 seconds
- Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
- After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
- Ready
HDCuben BIOS-update and settings
- IMPORTANT! Make sure that BIOS version is ATLEAST 0050.
- After powering on, keep pressing F2 every 0.5 seconds
- BIOS settings will open and look for Bios Version. If 3rd field has 0050 in it, there's no need to update BIOS. BUT, if it's something smaller like 0030, you HAVE to update BIOS!
- It's also good to check that player has been configured to power on automatically after power failure
- Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
- Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
- BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
- You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
- Choose your USB dongle from the menu and then choose the correct .bio file
PiCube
- Download latest software from http://swimages.firstview.fi/PiCubeLatest.img
- Download Win32 Disk Imager (windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager
- NOTE you HAVE to use above program to write the image to SD-card, you can't just copy it!
- Insert SD-card to card reader in your PC
- Use Win32 Disk Imager to write the image to SD-card
- Insert SD-card to Raspberry Pi and it's ready
- Instructions for Mac OS X http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X
- Instructions for Linux http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29
