Ero sivun ”Ohjelmiston asentaminen mediasoittimeen/en” versioiden välillä
FirstView
(Päivittäminen vastaamaan uutta versiota lähdesivusta) |
|||
| Rivi 1: | Rivi 1: | ||
<languages /> | <languages /> | ||
== HDCube == | == HDCube == | ||
| − | * | + | * Download latest software from http://swimages.firstview.fi/hd2015102036.zip (version '''2015102036''' released 22.10.2015 md5sum 20d527acea3be73a444c9aa67af0c290) |
| − | * ''' | + | * '''Make sure USB-stick follows these rules''' |
| − | ** | + | ** There's enough space |
| − | ** USB | + | ** USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc) |
| − | ** | + | ** If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/ |
| − | *** | + | *** Under options choose 'Quick Format' and 'Format size adjustment' = on |
| − | *** | + | *** Press ok and Format |
| − | * | + | * Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc |
| − | * | + | * Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then) |
| − | * | + | * Power on the player and keep pressing F10 every 0.5 seconds |
| − | * | + | * Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter. |
| − | * | + | * After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot |
| − | * | + | * Ready |
=== HDCuben BIOS-update and settings === | === HDCuben BIOS-update and settings === | ||
Versio 22. lokakuuta 2015 kello 09.26
HDCube
- Download latest software from http://swimages.firstview.fi/hd2015102036.zip (version 2015102036 released 22.10.2015 md5sum 20d527acea3be73a444c9aa67af0c290)
- Make sure USB-stick follows these rules
- There's enough space
- USB Dongle HAS to be in FAT32 format (NOT NTFS, HFS etc)
- If you have problems installing HDCube software, you can use SD Formatter tool to make sure USB Dongle is in correct format. https://www.sdcard.org/downloads/formatter_4/
- Under options choose 'Quick Format' and 'Format size adjustment' = on
- Press ok and Format
- Unzip .zip to root of the USB Dongle, so that there will be directory called EFI etc
- Insert USB Dongle, USB-keyboard and display to the player. (If player has no prior software on it, you will only need the USB Dongle, as it boots from there by default then)
- Power on the player and keep pressing F10 every 0.5 seconds
- Next you will see Boot Menu. Choose option that has BOTH UEFI and USB mentioned and press enter.
- After about 1 minute you will see 'Installation ready'. Remove USB Dongle and reboot
- Ready
HDCuben BIOS-update and settings
- IMPORTANT! Make sure that BIOS version is ATLEAST 0050.
- After powering on, keep pressing F2 every 0.5 seconds
- BIOS settings will open and look for Bios Version. If 3rd field has 0050 in it, there's no need to update BIOS. BUT, if it's something smaller like 0030, you HAVE to update BIOS!
- It's also good to check that player has been configured to power on automatically after power failure
- Easiest way to do it is with a mouse. Go to Advanced menu and from there choose Power tab.
- Look for After Power Failure and make sure Power On is chosen. If not, change it and press F10 and Y and the new settings will be saved
- BIOS update can be downloaded from https://downloadcenter.intel.com/search?keyword=DN2820FYKH (type in the exact model of your player hardware, look for Model: at the bottom of the case)
- You can use the same USB Dongle for BIOS update. Download .bio file to USB dongle, power on and keep pressing F7 every 0.5 seconds.
- Choose your USB dongle from the menu and then choose the correct .bio file
PiCube
- Download latest software from http://swimages.firstview.fi/PiCubeLatest.img (version 2015092490 released 24.9.2015)
- Download Win32 Disk Imager (windows) http://www.raspberry-projects.com/pi/pi-operating-systems/win32diskimager
- NOTE you HAVE to use above program to write the image to SD-card, you can't just copy it!
- Insert SD-card to card reader in your PC
- Use Win32 Disk Imager to write the image to SD-card
- Insert SD-card to Raspberry Pi and it's ready
- Instructions for Mac OS X http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_card_using_Mac_OS_X
- Instructions for Linux http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Raspberry_Pi.21.29
Katso tuetut minitietokoneet
